Frigidaire is a trusted brand known for its reliability and performance. Bot one of the most reported problems of the Frigidaire gas range is the burners are working perfectly, but the oven fails to heat up or function properly.

Insufficient gas supply, clogged gas line, and ignition problems can be the issue if your Frigidaire gas oven not working but burners are. But sometimes there can be some problem with the control system that causes this problem.

Stay with the article to know how you will solve the issue with your Frigidaire gas oven.

Key Takeaway:

Igniter Issues: Check the oven igniter for signs of damage or malfunction, as a faulty igniter can prevent the oven from heating.
Control Board Problems: Inspect the oven control board for any visible signs of damage or malfunction, as a faulty control board can prevent the oven from operating correctly.
Temperature Sensor: Test the oven temperature sensor for proper functionality, as a malfunctioning sensor can cause the oven to not heat properly.
Gas Supply: Ensure the gas supply valve is open and that there are no obstructions in the gas line, which could prevent the oven from igniting.
Why is my Frigidaire Gas Oven Not Working but Burners Are
Why is my Frigidaire Gas Oven Not Working but Burners Are

Frigidaire Gas Oven Not Working but Burners Are: Possible causes and solutions

Various factors can cause this problem with your gas oven, ranging from minor gas supply problems to more complex mechanical issues. 

Fortunately, there are several troubleshooting steps you can take to identify and resolve the problem.

Gas Supply Issues: 

If there is a problem with the gas supply in your apartment, your gas oven won’t have the fuel to run.

Some of the most common gas supply issues are: 

  • Gas valve malfunction: The gas valve controls the flow of gas to the oven’s burner. If the gas valve is faulty, it may not allow gas to reach the burner, preventing the oven from heating up.
  • Clogged gas line: The gas line supplies gas from the main gas source to the oven. If the gas line is clogged, it can restrict or block the flow of gas, causing the oven not to heat up.
  • Faulty gas regulator: The gas regulator controls the pressure of the gas flowing into the oven. If the regulator is malfunctioning, it may not provide the correct gas pressure, resulting in improper oven operation.

Solution: Gas Supply Check

You have to check the gas supply. With simple mechanical knowledge, you can check if the oven is getting its fuel or not. 

  • Ensure the gas supply to the oven is turned on. Check the gas shut-off valve near the oven and ensure it is in the open position.
  • Inspect the gas line for any signs of damage or kinks. If the gas line is damaged, it needs to be replaced by a qualified technician.
  • Check the gas regulator for any signs of damage or leaks. If the regulator is damaged, it needs to be replaced by a qualified technician.

Ignition Issues:

If your Frigidaire gas oven’s ignition system gets bad, the gas oven won’t work.

  • Faulty igniter: The igniter is responsible for sparking and igniting the gas in the oven burner. If the igniter is faulty, it may not produce a spark, preventing the oven from heating up.
  • Blocked ignition path: Debris or food particles can block the ignition path, preventing the spark from reaching the gas and igniting the burner.
  • Faulty flame sensor: The flame sensor detects the presence of a flame and sends a signal to the control board to keep the gas valve open. If the flame sensor is malfunctioning, it may not detect the flame, causing the gas valve to shut off and the oven to stop heating.

Solution: Ignition System inspection

  • Turn off the gas supply to the oven and remove the oven door.
  • Inspect the igniter for any signs of damage or corrosion. Clean the igniter with a soft brush if necessary.
  • Check the ignition path for any debris or obstructions that could be blocking the spark. Remove any debris you find.
  • Inspect the flame sensor for any signs of damage or soiling. Clean the flame sensor with a soft cloth if necessary.

Internal problems:

There can be several problems internally. Could be a malfunctioning or internal circuit break.  Either way, this also can make your frigidaire gas oven not working but burners are.

Some of the internal problems are: 

  • Error Code: If your Frigidaire gas oven is not working and an error code appears on the display, it’s worth trying a simple reset. 

Press the “Cancel” button and reprogram the oven. If the problem persists, disconnect the power to the unit for 30 seconds and then restore power. 

This reset often resolves minor glitches and brings the oven back to normal functioning. 

  • Delay Start: Sometimes, the oven controls may not respond if a delay start feature has been activated for a timed bake or self-cleaning program. 

If you see the words “Delay” and “Bake” or “Self Clean” on the display, press the “Cancel” button to cancel the delay start. Select a new oven program, set the desired temperature, and press “Start” to see if the oven starts working.

  • Control Panel and Touchpad: Another potential culprit for an oven that won’t turn on is a defective control panel and touchpad. 

Check if some touchpad buttons are responsive while others are not. If only certain buttons work, it suggests a faulty touchpad and control panel that requires replacement.

However, if none of the buttons respond, a defective control board may be the cause. In such cases, consult a professional technician for further diagnosis and repair.

  • Bake or Broil Spark Electrode: For proper ignition of the bake and broil burners, an oven relies on a spark electrode. This electrode, located near the burner, creates a spark that ignites the gas. 

If the electrode is broken or worn out, the spark may not occur. Visually inspect the electrode assembly for any cracks or damage.

And ensure that there is a proper ground and correct polarity of the voltage reaching the range. 

If the burner goes off after ignition, check the ground and polarity at the wall outlet. If necessary, replace the bake or broil spark electrode.

  • Main control board: The main control board in your Frigidaire gas oven contains relays that send voltage to the bake and broil circuits based on user settings and sensor inputs. 

If one of the control board relays shorts closed, it may continuously supply voltage to the heating circuit even when the oven is turned off. If your oven continues to heat even after being turned off, the main control board is likely defective. 

In such cases, replace the control board to resolve the issue.

By following the troubleshooting steps outlined in this guide, you can identify and resolve common issues for frigidaire gas oven not working but burners are. Remember to prioritize safety at all times and seek professional help if needed.

If any of the steps don’t work, a qualified technician is needed to diagnose and repair complex issues with your oven.

If you are still in the warranty period, contact Frigidaire’s customer service or refer to their authorized service centers for reliable assistance.

 [Here is a video by Ben’s Application and Junk where he visually explained the troubleshooting of a Frigidaire Gas Oven. ]

Frequently Asked Questions – FAQs

Why do my burners work but my oven doesn’t?

If you are using an electric range, that can be a bad thermostat control that is causing your burners to work but the oven fails.

If it is a gas stove, then it is highly caused by a bad oven control the ignitor or safety valve, or a broken wire.

Why is my gas oven not lighting but burners are?

Faulty Igniters usually are the reason for this problem. Check the ignitor and spectate it. If you see any damage, change it.

Similar Posts