If your Whirlpool gas oven is clicking but not lighting, it may be due to issues with the igniter, gas supply, electrical connections, or control board.

When a Whirlpool gas oven clicks but fails to ignite, it suggests potential problems with crucial components.

Begin by examining the igniter to determine if it is receiving power and emitting a strong, consistent spark. If the igniter is malfunctioning or weak, it may need to be replaced.

Check the gas supply to ensure it is turned on and that there are no blockages in the gas line.

Faulty electrical connections or a malfunctioning control board could also disrupt the ignition process, requiring further inspection and potential repair or replacement.

Key Takeaway

  • Assess the igniter: Inspect the igniter to verify if it is receiving power and emitting a strong spark, as a faulty igniter can prevent the oven from lighting.
  • Verify the gas supply: Ensure the gas supply to the oven is turned on and that there are no obstructions in the gas line that could impede proper ignition.
  • Check electrical connections: Examine electrical connections to the igniter, gas valve, and control board to ensure they are secure and free of damage.
  • Evaluate the control board: Investigate the control board for any signs of malfunction or damage that could be affecting the oven’s ignition process.
Whirlpool Gas Oven Clicking but not Lighting
Whirlpool Gas Oven Clicking but not Lighting

If you’re experiencing the frustrating issue of a Whirlpool gas oven clicking but not lighting, you’re not alone.

The possible reasons include a lack of gas supply, clogged burner, a faulty igniter, a malfunctioning gas valve, or a faulty control board.

But don’t worry, we’re here to help you troubleshoot and fix the issue with practical solutions.

Read More: Samsung Oven Not Heating to Correct Temperature: How to Fix It? 

Understanding the Clicking Sound

If you have a Whirlpool gas oven that’s clicking but not lighting, it’s important to understand what might be causing the issue.

The clicking sound you hear is likely the sound of the oven's igniter trying to ignite the gas but failing to do so.

There are several reasons why the igniter may fail to light the gas. The most common reasons include:

  • A lack of gas supply to the oven
  • Clogged burner
  • A faulty igniter
  • A malfunctioning gas valve
  • A problem with the oven’s control board 

Read More: Samsung Oven Buttons Not Working: A Complete Guideline How to Fix This Issue

How to fix Whirlpool Gas Oven Clicking but not Lighting?

Understanding these possible causes will help you troubleshoot and fix the problem with your Whirlpool gas oven. 

Step 1: Checking the Gas Supply

If your Whirlpool gas oven is clicking but not lighting, it could be due to a lack of gas supply.

Here are the steps to check the gas supply and fix the issue:

  • Ensure that the gas valve is open and the supply line is not bent or damaged.
  • Turn off the gas supply and unplug the oven.
  • Locate the gas shut-off valve, usually located behind the oven, and turn it off.
  • Remove the burner grates and the burner cap.
  • Remove the nut holding the burner base and lift the burner assembly out of the oven.
  • Inspect the burner ports for any blockage or debris. Use a paper clip to clean any blockage in the ports.
  • Reinstall the burner assembly and secure it with the nut.
  • Replace the burner cap and grates.
  • Turn on the gas supply and plug in the oven.
  • Preheat the oven to test if it is now lighting correctly.

Step 2: Cleaning the Gas Burner

Cleaning a clogged burner on a Whirlpool gas oven involves a few simple steps. Here’s a general guide.

Turn Off the Gas Supply

Before doing any maintenance, ensure that the gas supply to the oven is turned off to ensure safety.

Remove the Burner

Depending on your Whirlpool oven model, you may need to lift the burner assembly or remove grates to access the burner. Consult your manual for specific instructions.

Inspect the Burner Holes

Examine the burner holes for any visible debris, food particles, or grease. Soak it into regular dish wash soap with warm water for 30 minutes. Use a toothbrush or soft brush to gently scrub away loose debris.

Use a Needle or Pin

Carefully insert a needle or pin into the small holes of the burner to dislodge any stubborn debris. Be gentle to avoid damaging the burner holes.

Clean the Burner Head

Wipe down the entire burner head with a damp cloth to remove any residue. Ensure that the burner is completely dry before reassembly. 

Step 3: Inspecting the Igniter

If you have checked the gas supply and it is not the issue, the next step is to inspect the igniter. To inspect the igniter:

Locate the Igniter

Check your oven’s manual to find the igniter’s location. Typically, it’s at the back of the burner.

Visual Inspection

Examine the igniter for any signs of damage or wear.

Continuity Test

  • Use a multimeter set to the ohms setting.
  • Touch the multimeter probes to the two igniter terminals.
  • If there’s continuity, the igniter is functioning correctly.
  • No continuity indicates a faulty igniter that needs replacement.

Replacement Steps

  • Refer to your oven’s manual for specific replacement instructions.
  • Alternatively, hire a professional if you’re not comfortable doing it yourself.

Step 4: Checking the Control Board

If the previous troubleshooting steps didn’t resolve the clicking but not lighting issue with your Whirlpool gas oven, it’s time to check the control board.

A malfunctioning control board can prevent the oven from working correctly, leading to the clicking sound.

Before proceeding with any control board repairs, make sure to turn off the gas and power supply to the oven.

To check the control board, follow these steps:

  • Remove the control panel from the oven by unscrewing the screws holding it in place.
  • Inspect the control board for any visible damage, such as burnt spots or loose connections. If you identify any physical damage, the control board needs to be replaced.
  • If there is no visible damage, use a multimeter to test the control board for continuity. This test will identify any breaks in the circuitry that may be preventing the oven from working properly.
  • If the multimeter test reveals a problem with the control board, it should be replaced. Contact Whirlpool customer support to order a replacement control board specifically designed for your oven model.

Step 5: Contacting Whirlpool Customer Support

If you have tried all the troubleshooting steps and your Whirlpool gas oven is still clicking but not lighting, it may be time to contact their customer support team.

They have a team of experienced professionals who can help you solve the problem.

Before you contact them, make sure you have your oven’s model number and serial number on hand. This information will help them to better assist you.

You can reach Whirlpool customer support through their website or by phone. The website has a live chat feature that allows you to chat with a customer service representative.

You can call their toll-free number and speak with a representative directly.

Contact MethodContact Information
PhoneToll-Free: 1-800-253-1301

When you contact them, be sure to explain the issue in detail and let them know that you have already tried the troubleshooting steps mentioned in this guide.

They may ask you additional questions or provide you with further instructions to resolve the issue.

Frequently Asked Questions FAQs

Why is my Whirlpool gas oven clicking but not lighting?

This issue is often related to a faulty igniter or a problem with the gas supply.

Can I visually inspect the igniter for issues?

Yes, locate the igniter at the back of the burner and visually inspect it. Look for any signs of damage or wear. If it appears damaged, it may need replacement.

How do I locate the igniter in my Whirlpool oven?

Check your oven’s manual for the exact location, but it’s typically at the back of the burner.


When confronted with a Whirlpool gas oven that clicks but does not light, it’s essential to systematically diagnose potential issues with the igniter, gas supply, electrical connections, and control board.

By methodically troubleshooting these components, you can identify and address the underlying problem, whether it’s a faulty part or a disruption in the gas supply.

Prioritize safety precautions when working with gas appliances and consider seeking professional assistance if needed.

With proper diagnosis and corrective action, you can restore your Whirlpool gas oven to full functionality, ensuring reliable performance for all your culinary endeavors.

Similar Posts